A Lick of Paint

Making your life, your home and yourself more beautiful

July 29, 2011

DIY essentials

Filed under: Advice — Liz @ 4:46 pm

Every person who does DIY knows that the most important thing to do before starting is to make sure you have enough tea bags to get you through the job. Tea and DIY are like cookies and cream or like sausage and mash - they’re a match made in heaven.

The type of tea you drink when you are doing DIY is imperative, there’s no point drinking Earl Grey, Jasmine or Camomile, what you need is good old builders brew, well steeped and with a little milk plus two sugars and plently of it.

Another important thing here is the art of never making a brew yourself. Getting someone else to make a brew is epitome DIY nirvana.


• • •
 

July 26, 2011

Preparations before painting

Filed under: painting — Bob @ 4:45 pm

Any painting and decorating job should always be done properly to get the best level of finish. And to do this there’s one thing you must always get right - and that’s the preparation.

Preparing the surfaces before you start painting is imperative. If you simply paint over the exisitng piaitnt without any preparation you’ll only create more work in the long run as the new paint you apply will simply flake off.

Skirtings and window frames will need to be sanded down gently before applying an undercoat. top coat should only be applied after the undercoat and with gentle sanding between. If you are painting over bare wood you should always use primer first.

If you are using emulsion, make sure the walls are smooth and give them a wipe over to remove any residues such as grease or anything which my stop the new paint adhering properley.

It’s only if you get the preparation right that you’ll get the best finish.


• • •
 

July 12, 2011

Using an electric plane

Filed under: Advice — Bob @ 4:25 pm

We’ve all been there - you’ve had new carpets fitted and the fitting company had to remove your doors. You screw them back in place only to find there’s not a cat-in-hells chance of them ever closing again. What you need to do is to remove some meat from the bottom of the door.

Using an electric plane is the easiest and most dangerous way of removing some wood from the bottom of a door. The door simply needs removing from the door frame and lying on its side. Using a straight edge mark on both sides of the door the amount of wood you need to remove.

It’s best to use the plane outdoors because of the mess it will create. Start the plane on the lowest setting and shave a small amount from the door until you get the feel for it. Turn the door over to plane the other side and make sure you are planing evenly. Use sandpaper to get a good finish.

When using an electric plane, safety glasses, a safety mask and gloves should always be worn.


• • •
 

July 8, 2011

Cutting skirting boards

Filed under: Advice — Bob @ 4:56 pm

If you have every tried to fit your own skirting boards you will realise the job is a lot trickier than it looks. Fitting them to the wall is ok, as is adding the coat of primer and top coat of paint. The difficult bit it getting the angles right when you are cutting them.

One of the best tools to use when cutting any angles on any wood working job is a mitre saw. A mitre saw can hold the piece of wood in place until you accurately cut it to form the exact angle needed.

You would think that most skirtings would only need a 45 degree angle cutting, but many homes in the UK are not square and a variety of angles may need to be cut so you can butt the skirtings together to get the best finish.


• • •
 

May 23, 2011

Top up your redecorating budget with help from Bet365 Bingo

Filed under: Planning — Liz @ 2:35 pm

Everyone knows that building, redecorating and remodelling projects can be expensive. They hardly ever run to schedule and this inevitably creates extra costs that won’t have been included in your budget.

To cover any unexpected costs and allow you to fulfil all of your ambitions for your DIY project, you will need an injection of cash from somewhere. You may not have considered before, but online bingo could be the answer.

With a fraction of the risk of other types of online gaming (i.e. casino, poker games) – meaning that there’s hardly a chance of you gambling away your life savings – online bingo can help you raise the cash you need, and really quickly if your luck is in.

The Bet365 Bingo website, in particular, features games with huge guaranteed jackpots to be won right now, such as:

The £250,000 Big Night In – play on 29th May
The £10,000 Big Night After – play on Thursday 2nd June for a second shot at thousands of pounds in free cash prizes
The £10,000 Bingo Linx – play every day at 12p, 6pm and 10.30pm to win thousands!

If you want to find out a little more about Bet365 Bingo and its games and offers, look no further than www.ohmybingo.com.


• • •
 

April 24, 2011

Home drain maintenance

Filed under: Advice — Bob @ 3:31 pm

We all rely on the drains that lead away from our homes on a daily basis, but we do little with regard to their maintenance until we have a blockage. There are some things you can do however to stop blockages before they occur.

  • Pour boiling water down the drain on a regular basis
  • Use debris catchers in sinks and bathtubs to collect food stuffs and hair
  • Once a year pour a drain cleaning solution into your sink and bathtub plugholes
  • Clear garden debris from the outside drains
  • Keep your gutters clear from leaf debris

If you keep on top of your drain maintenance you won’t have to call a drain cleaning company as you won’t have a blocked drain.


• • •
 

April 20, 2011

Having the right tools for the job

Filed under: Advice — Bob @ 11:41 am

If you have the right tools for the job you are doing will make a huge amount of difference to how quick you do the job and the quality of the finished job.

Some examples include:

Electrics: A multimeter - Checking voltages is impossible without a meter of some sort. And if you have a good multimeter you will be able to check AC, Dc and measure current.

Plastering: A float - Without a float, plastering a wall is nigh on impossible. If you try to use a trowel, you will be set up to fail.

Plumbing: Being able to use an adjustable wrench does not make you a plumber. You need a wide range of tools and not rely on the new type of push-fit connectors.


• • •
 

April 10, 2011

Grouting made simple

Filed under: Advice — Liz @ 2:23 pm

Fitting new tiles in the bathroom is not a complicated task; you just have to have the right tools and a little knowhow.

Assuming you’ve fixed the tiles to the wall, you will now have to mix your grout. The grout should have a smooth consistency similar to think cream.

Using a float, the grout can be pushed into the gaps between the tiles; don’t be tempted to use your fingers. When all the gaps are filled, run over the surface with the float one more time making sure there are no air bubbles beneath the surface of the grout. After about 20 minutes you can wipe the excess grout from the tiled surface using a damp cloth, making sure that the grout lies just under the level of the tiles. After a further hour, the surface of the tiles can be polished with a sponge. Make sure you leave adequate time before wetting the grout by having a bath or using the shower.

It’s always a good idea to get a professional to do the job if you are struggling or are unsure in any way.


• • •
 

April 5, 2011

Replacing leaky taps

Filed under: Advice — Bob @ 2:23 pm

There comes a time when the taps in your kitchen or bathroom will need replacing. It may be that they have simply given up the ghost, or it might be that you simply want to redesign the look of the room.

Replacing taps is easy, if you have the right tools and are confident about tackling this type of DIY job. If you are lucky, your taps will have been fitted with shut off valves, which can simply be turned off to isolate the water supply. If they haven’t got these valves, you will have to turn off the cold water supply and the hot water supply (depending on your heating system).

When fitting new taps, it’s always advisable to fit isolating valves so any maintenance at a later stage can be done quickly and easily. It’s also a good idea to use flexible braided hoses, which can make the installation job a lot easier.


• • •
 

February 28, 2011

GSI is the new DIY

Filed under: Advice — Liz @ 4:20 pm

GSI is the new DIY, or it is for many people. After the surge in popularity of DIY over the last decade it comes as somewhat of a surprise that more and more people are leaving DIY behind and are instead using professionals to do the work for them.

The benefit of doing DIY is that you can save a lot of money, however you might not get the level of finish you are after. A professional will not only do a better job, if you are unhappy you can get them to remedy any problems or niggles you may have.

Getting Someone In is going to become even more prominent over the next few years, as homeowners will struggle to find time away from their jobs to spend any time at home.


• • •
 

Somthing to think about:
If you are looking for Family Ski Holiday come to us.
Cheap Raspberry Canes For Sale
Military Magnum Boots
Great prices for Underlay
Car brakes

« Previous PageNext Page »